|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1.5V Drive Pch MOSFET RZQ050P01 Structure Silicon P-channel MOSFET Dimensions (Unit : mm) TSMT6 1.0MAX 0.85 0.7 (1) (2) (3) 1pin mark 0.4 0.16 Each lead has same dimensions Abbreviated symbol : YF Applications Switching Packaging specifications Package Type RZQ050P01 Code Basic ordering unit (pieces) Taping TR 3000 Equivalent circuit (6) (5) (4) 2 1 (1) (2) (3) 1 ESD PROTECTION DIODE 2 BODY DIODE (1) Drain (2) Drain (3) Gate (4) Source (5) Drain (6) Drain Absolute maximum ratings (Ta=25C) Parameter Drain-source voltage Gate-source voltage Drain current Source current (Body diode) Total power dissipation Channel temperature Range of Storage temperature 1 Pw10s, Duty cycle1% 2 When mounted on a ceramic board Continuous Pulsed Continuous Pulsed Symbol VDSS VGSS ID IDP IS ISP PD Tch Tstg 1 1 2 Limits -12 10 5 20 -1 -20 1.25 150 -55 to +150 Unit V V A A A A W C C Thermal resistance Parameter Channel to ambient When mounted on a ceramic board. Symbol Rth(ch-a) Limits 100 Unit C / W www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 0.3~0.6 Features 1) Low on-resistance. 2) High power package. 3) Low voltage drive. (1.5V) 2.9 1.9 0.95 0.95 (6) (5) (4) 1.6 2.8 0~0.1 1/5 2009.01 - Rev.A RZQ050P01 Electrical characteristics (Ta=25C) Parameter Symbol Min. Gate-source leakage - IGSS Drain-source breakdown voltage V(BR) DSS -12 Zero gate voltage drain current IDSS - Gate threshold voltage VGS (th) -0.3 - Static drain-source on-state - RDS (on) resistance - - Forward transfer admittance 8 Yfs Input capacitance Ciss - Output capacitance Coss - Reverse transfer capacitance - Crss Turn-on delay time - td (on) Rise time tr - Turn-off delay time - td (off) Fall time - tf Total gate charge Qg - Gate-source charge - Qgs Gate-drain charge - Qgd Pulsed Data Sheet Typ. - - - - 19 26 33 44 - 2850 350 320 12 100 420 225 35 6.5 5.5 Max. 10 - -1 -1.0 26 36 49 88 - - - - - - - - - - - Unit A V A V m m m m S pF pF pF ns ns ns ns nC nC nC Conditions VGS=10V, VDS=0V ID= -1mA, VGS=0V VDS= -12V, VGS=0V VDS= -6V, ID= -1mA ID= -5A, VGS= -4.5V ID= -2.5A, VGS= -2.5V ID= -2.5A, VGS= -1.8V ID= -1A, VGS= -1.5V VDS= -6V, ID= -5A VDS= -6V VGS=0V f=1MHz ID= -2.5A VDD -6V VGS= -4.5V RL 2.4 RG=10 RL 1.2 VDD -6V VGS= -4.5V RG=10 ID= -5A Body diode characteristics (Source-drain) (Ta=25C) Parameter Forward voltage Pulsed Symbol VSD Min. - Typ. - Max. -1.2 Unit V Conditions IS= -5A, VGS=0V www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/5 2009.01 - Rev.A RZQ050P01 Electrical characteristic curves 10 8 6 4 2 VGS=-1.0V 0 0 0.2 0.4 0.6 0.8 1 Ta=25 Pulsed DRAIN CURRENT : -ID[A] VGS=-10V VGS=-4.5V VGS=-2.5V VGS=-1.8V VGS=-1.2V VGS=-1.5V VGS=-1.1V 10 8 6 4 2 0 0 2 4 6 8 10 VGS=-1.2V VGS=-1.8V VGS=-1.5V DRAIN CURRENT : -ID[A] VGS=-1.3V 1 10 VDS=-6V Pulsed Ta=125 Ta=75 Ta=25 Ta= -25 Data Sheet DRAIN CURRENT : -ID[A] 0.1 VGS=-1.1V Ta=25 Pulsed 0.01 0.001 0 0.5 1 1.5 GATE-SOURCE VOLTAGE : -VGS[V] Fig.3 Typical Transfer Characteristics DRAIN-SOURCE VOLTAGE : -VDS[V] Fig.1 Typical Output Characteristics() DRAIN-SOURCE VOLTAGE : -VDS[V] Fig.2 Typical Output Characteristics() STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] Ta=25 Pulsed 100 VGS= -1.5V VGS= -1.8V VGS= -2.5V VGS= -4.5V VGS= -4.5V Pulsed STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] 1000 1000 1000 100 Ta=125 Ta=75 Ta=25 Ta= -25 VGS= -2.5V Pulsed 100 Ta=125 Ta= 75 Ta= 25 Ta=-25 10 10 10 1 0.1 1 DRAIN-CURRENT : -ID[A] Fig.4 Static Drain-Source On-State Resistance vs. Drain Current() 10 1 0.1 1 DRAIN-CURRENT : -ID[A] Fig.5 Static Drain-Source On-State Resistance vs. Drain Current() 10 1 0.1 1 DRAIN-CURRENT : -ID[A] Fig.6 Static Drain-Source On-State Resistance vs. Drain Current() 10 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] REVERSE DRAIN CURRENT : -Is [A] 1000 VGS= -1.8V Pulsed 100 Ta=125 Ta= 75 Ta= 25 Ta=-25 1000 VGS= -1.5V Pulsed 100 Ta=125 Ta= 75 Ta= 25 Ta=-25 10 VGS=0V Pulsed Ta=125 Ta= 75 Ta= 25 Ta=-25 1 10 10 0.1 1 0.1 1 DRAIN-CURRENT : -ID[A] Fig.7 Static Drain-Source On-State Resistance vs. Drain Current() 10 1 0.1 1 DRAIN-CURRENT : -ID[A] Fig.8 Static Drain-Source On-State Resistance vs. Drain Current() 10 0.01 0 0.2 0.4 0.6 0.8 1 1.2 SOURCE-DRAIN VOLTAGE : -VSD [V] Fig.9 Reverse Drain Current vs. Sourse-Drain Voltage www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/5 2009.01 - Rev.A RZQ050P01 Data Sheet STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[m] 150 FORWARD TRANSFER ADMITTANCE : |Yfs| [S] 125 100 75 50 25 0 0 2 4 6 8 10 GATE-SOURCE VOLTAGE : -VGS[V] Fig.10 Static Drain-Source On-State Resistance vs. Gate Source Voltage ID= -5.0A ID= -2.5A Ta=25 Pulsed 100 GATE-SOURCE VOLTAGE : -VGS [V] 10 VDS=-6V Pulsed 5 Ta=25 VDD=-6.0V ID=-5.0A RG=10 3 Pulsed 4 2 1 0 0 5 10 15 20 25 30 35 TOTAL GATE CHARGE : Qg [nC] Fig.12 Dynamic Input Characteristics 10 1 Ta=125 Ta= 75 Ta= 25 Ta=-25 0 0.1 1 DRAIN-CURRENT : -ID[A] Fig.11 Forward Transfer Admittance vs. Drain Current 10000 SWITCHING TIME : t [ns] CAPACITANCE : C [pF] Ciss 100000 10000 1000 100 10 tr 1 0.01 0.1 1 10 100 0.01 0.1 1 td(on) tf td(off) Ta=25 VDD= -6.0V VGS= -4.5V RG= 10 Pulsed 1000 Crss Ta=25 f=1MHz VGS=0V 100 Coss 10 DRAIN-SOURCE VOLTAGE : -VDS[V] Fig.13 Typical Capacitance vs. Drain-Source Voltage DRAIN CURRENT : -ID[A] Fig.14 SwitchingCharacteristics www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 4/5 2009.01 - Rev.A RZQ050P01 Measurement circuits Pulse Width VGS ID RL D.U.T. RG VDD VDS Data Sheet VGS 10% 50% 10% 90% 50% 10% 90% VDS 90% td(on) ton tr td(off) toff tf Fig.15 Switching Time Measurement Circuit Fig.16 Switching Waveforms VG VGS ID RL VDS VGS Qgs Qg IG(Const) D.U.T. RG VDD Qgd Charge Fig.17 Gate Charge Measurement Circuit Fig.18 Gate Charge Waveform Notice This product might cause chip aging and breakdown under the large electrified environment . Please consider to design ESD protection circuit. www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 5/5 2009.01 - Rev.A Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM CO.,LTD. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.0 |
Price & Availability of RZQ050P01 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |